• V.O.C. Compliant
• Great All-Purpose Sealer (Water-Based)
• Penetrates Like a Solvent and Evaporates
• Protects Your Stone from Water and Oil Stains

Product Description: A water based impregnator sealer, which penetrates grout, stone and masonry surfaces to protect against water and oil staining while allowing substrate to properly breath. Non-yellowing and long-lasting. Will not change the appearance of your stone surface. Will not alter proper cure time on new grout.

Coverage: Product will cover approximately 200 to 1,000 sqft. per gallon dependant on porosity of stone. Two coats are recommended for optimum performance. Cure time: 24 hrs. / repels water, 72 hrs. / fully cured.

Directions: Always test product in an inconspicuous area to test suitability for intended use. Surface must be sound, thoroughly clean and free from waxes, sealants or coatings of any kind. For best results, use Stone Pro's Formula 51 stripper before applying Aqua Pro. Apply product evenly using a low-pressure sprayer or lamb's wool applicator. Do not dilute in any way.

Caution: Combustible. Keep away from heat, open flame, sparks and/or any possible ignition source. Keep work well ventilated. Gloves and goggles should be worn at all times. Respirator suggested in larger areas or non-ventilated areas. Read directions and other cautions on back of container before use of this product.